200W Switching Power Supply D-200 Series

Switching Power Supply D-200 1.INPUT:110V or 220V 2.CE RoHS Approval 3.DIMENSION: 165*97*50mm (L*W*H) 4. 1 Year Warranty

200W Switching Power Supply D-200 Series

Features:

AC input range selectable by switchProtections: Short circuit / Overload / Over voltageCooling by free air convection100% full load burn-in testFixed switching frequency at 25KHz1 years warranty

1. 200W SPECIFICATION:

 

MODEL	D-200-5	D-200 -7.5	D-200 -9	D-200 -12	D-200 -13.5	D-200 -15	D-200 -24	D-200 -27	D-200 -48
DC VOLTAGE	5V	7.5V	9V	12V	13.5V	15V	24V	27V	48V
RATED CURRENT	40A	26.7A	22.3A	16.7A	14.8A	13.3A	8.3A	7.4A	4.2A
CURRENT RANGE	0 ~ 40A	0 ~ 26.7A	0 ~ 22.3A	0 ~ 16.7A	0 ~ 14.8A	0 ~ 13.3A	0 ~ 8.3A	0 ~ 7.4A	0 ~ 4.2A
RATED POWER	200W	200W	200W	200W	200W	200W	200W	200W	200W
RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	180mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
VOLTAGE ADJ. RANGE	4.5 ~ 5.5V	6 ~ 8.3V	8 ~ 10.4V	10.6 ~ 13.2V	12 ~ 15V	13.5 ~ 16.5V	21 ~ 28V	24 ~ 30V	43 ~ 53V
VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
LOAD REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
SETUP, RISE, HOLD TIME	100ms, 50ms at full load
HOLD TIME(Typ.)	28ms at full load
VOLTAGE RANGE	88 ~ 132VAC/176 ~ 264VAC selected by switch       248 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	78%	80%	80%	82%	83%	84%	85%	86%	87%
AC CURRENT	3.2A/115VAC         1.6A/230VAC
INRUSH CURRENT (max.)	COLD START 35A
LEAKAGE CURRENT	<3.5mA / 240VAC
OVERLOAD	105 ~ 150% rated output power
	Protection type : Shut down o/p voltage, re-power on to recover.
OVER VOLTAGE	5.75 ~ 6.75V	8.63 ~ 10.13V	10.35 ~ 12.2V	13.8 ~ 16.2V	15.53 ~ 18.2V	17.25 ~ 20.3V	30 ~ 34.8V	31.1 ~ 36.45V	55.2 ~ 64.8V
	Protection type : Shut down o/p voltage, re-power on to recover.
WORKING TEMP.	-10 ~ +60ºC (Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS	Design refer to UL1012, UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT	Compliance to EN61000-3-2,-3
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF	286.7K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION	165*97*50 mm (L*W*H)
PACKING	0.757Kg; 16pcs/13.67Kg/0.0287CMB
NOTE:1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

2. Products Showcase:

3.Package